Notes · CSAT
Speed, work, averages, tables and data sufficiency
By the end, you will have one method each for questions on speed and distance, work and pipes, averages and mixtures, reading a table or chart, and deciding whether the given data are enough.
Speed, time and distance
Everything here comes from one relation: distance = speed x time. Before using it, make the units agree. To change kilometres per hour into metres per second, multiply by 5/18. So 54 km/h is 15 m/s and 90 km/h is 25 m/s.
When a train crosses a pole or a standing person, it covers its own length. When it crosses a platform or another train, it covers the sum of the two lengths. A train 150 metres long at 15 m/s passes a pole in 10 seconds.
When two bodies move, use relative speed. Moving towards each other, add the speeds. Moving in the same direction, subtract them. Two trains at 40 and 50 km/h in opposite directions close at 90 km/h.
Average speed is total distance divided by total time. It is not the average of the speeds. If a journey is made at 40 km/h and the return over the same distance at 60 km/h, the average is 2 x 40 x 60 / (40 + 60) = 48 km/h, because more time is spent at the lower speed.
For boats, speed downstream is the speed in still water plus the speed of the stream, and upstream is the difference. A boat that does 12 km/h in still water, on a stream of 3 km/h, moves at 15 km/h downstream and 9 km/h upstream.
Work, pipes and people
Think of work as a rate: the fraction of the job done in one day or one hour. If A finishes a job in 12 days, A does 1/12 of it each day. Rates add. With B, who takes 18 days, the two together do 1/12 + 1/18 = 5/36 of the job each day, so they need 36/5 = 7.2 days.
The same idea runs backwards. If A and B together take 10 days and A alone takes 15, then B's daily rate is 1/10 - 1/15 = 1/30, and B alone needs 30 days.
Pipes and tanks are work questions with one change: a leak or an outlet has a negative rate. A pipe that fills a tank in 6 hours, working against a leak that would empty it in 12, fills 1/6 - 1/12 = 1/12 of the tank each hour, and needs 12 hours.
When the question is about numbers of workers, count the work in person-days. Twelve people for 15 days is 180 person-days. To finish in 9 days you need 180 / 9 = 20 people. This assumes every person works at the same rate, which such questions take for granted unless they say otherwise.
A useful shortcut is to take the total work as the LCM of the given days. For 12 and 18 days, call the work 36 units. A does 3 units a day and B does 2, so together they do 5, and 36 / 5 = 7.2 days. This avoids fractions.
Averages and mixtures
An average is a total divided by a count, so the total is the average times the count. Nearly every average question is solved by moving to totals.
If five numbers have an average of 24, their total is 120. If one is removed and the other four average 22, their total is 88, so the number removed is 32.
If 30 students have an average age of 14, the total is 420. When the teacher is included, 31 people average 15, a total of 465. The teacher is 45. A quicker way to see it: the teacher must supply the new average, 15, plus one extra year for each of the 30 students, which is 15 + 30 = 45.
A mixture is a weighted average. When 20 kg of tea at 300 rupees a kilogram is mixed with 30 kg at 400 rupees, the cost of the mixture is (20 x 300 + 30 x 400) / 50 = 360 rupees a kilogram. The answer must lie between the two prices and nearer to the price of the larger quantity. That gives a quick check: 360 is nearer to 400 than to 300, as it should be with more of the dearer tea.
The same reasoning shows why the average speed over equal distances is nearer to the lower speed: more time, and so more weight, goes to the slower part.
Tables, charts and graphs
Data interpretation questions give the numbers in a table, bar chart, line graph or pie chart, and ask for a comparison. The arithmetic is light. The care goes into reading.
Read the title, the units and any note before the questions. Check whether figures are in thousands or lakhs, and whether a pie chart shows degrees or percentages.
Keep three measures apart. A share is a part divided by the whole: if sales in four quarters are 120, 150, 180 and 150, the third quarter's share is 180 out of 600, or 30%. A percentage change is the change divided by the earlier value: from 120 to 180 is a rise of 60 on 120, or 50%. A difference in percentage points is a subtraction of two percentages: a share that moves from 20% to 30% has risen by 10 percentage points, which is a 50% rise in the share.
Approximate before you calculate. If the options are far apart, rounding 148 to 150 is safe. If they are close, work exactly.
In a pie chart, the whole is 360 degrees or 100%, so 1% is 3.6 degrees. In a line graph, the steepest segment shows the largest absolute change, not necessarily the largest percentage change, because the starting values differ.
Data sufficiency
A data sufficiency question gives a question and two statements. You are not asked for the answer. You are asked whether the statements give enough information to find it.
Follow a fixed order. First, read the question and note what would settle it: one value, or a yes or no. Second, take statement 1 alone and forget statement 2. Third, take statement 2 alone and forget statement 1. Only if neither is enough alone, put them together.
Sufficient means that exactly one answer follows. If a statement allows two values, it is not sufficient. For a yes-or-no question, a statement that always gives no is sufficient, because the question is settled.
Do not carry the calculation to the end. To know that x + y = 10 and x - y = 4 fix x, it is enough to see two different equations in two unknowns. Stopping there saves time.
Two cautions. Do not bring in facts that are not given. And check whether the two statements say the same thing in different words, such as x + y = 10 and 2x + 2y = 20. Together they are still one equation and still not enough.
Key facts
- km/h to m/s: multiply by 5/18.
- Crossing a pole: own length. Crossing a platform or train: sum of lengths.
- Opposite directions: add speeds. Same direction: subtract.
- Average speed over equal distances at a and b: 2ab / (a + b).
- Work rates add; a leak has a negative rate.
- Total = average x count; solve average questions through totals.
- A mixture's price lies between the two prices, nearer the larger quantity.
- Share, percentage change and percentage points are three different measures.
- Data sufficiency: test each statement alone, then together; sufficient means one answer only.
How the exam uses it
These questions reward a fixed routine more than speed. Write the units, move averages to totals, treat work as a rate, and in data sufficiency stop as soon as you can see whether one answer follows. In tables and charts, most marks are lost by misreading the units or the base of a percentage, so read the heading first.
Test yourself (no peeking)
Try to answer each one from memory, out loud or on paper. The effort of pulling it out is what makes it stay.
- Why is the average speed for equal distances at 40 and 60 km/h not 50 km/h?
- A takes 10 days and B takes 15 days for a job. How long do they take together?
- The average of six numbers is 20. A seventh number makes the average 21. What is the seventh number?
- A share rises from 25% to 30%. State the change in percentage points and as a percentage.
- In data sufficiency, what does sufficient mean, and in what order do you test the statements?
Sources: UPSC Civil Services Examination notification: syllabus of Preliminary Examination Paper II (basic numeracy and data interpretation, Class X level); NCERT Mathematics textbooks, Classes VI to X: chapters on comparing quantities, direct and inverse proportion, data handling and statistics
Syllabus topic: Basic numeracy and data interpretation (with the PYQs on it)
More notes
- Arrangements, blood relations, directions and codingCSAT
- Decision making: reading the situation and choosing a course of actionCSAT
- Inference, assumptions and toneCSAT
- Interpersonal skills: listening and respondingCSAT
- Numbers, percentages and ratios: methods that save timeCSAT
- Setting priorities and solving problems step by stepCSAT