Aspiran

Notes · GS3: Economy, Environment, Science, Security

Industrial policy from 1991 to production-linked incentives: what changed and why

By the end, you will be able to set out what the 1991 reforms removed, how the policy turned from removing controls to actively promoting manufacturing, and the main tools now in use for industry and small firms.

7 min read Updated 2026-11-21

18

PYQs on this, 2016 to 2026
Mains, this syllabus line: 18

2'163'172'18'192'201'212'222'232'241'251'26

The system before 1991

Industrial policy after independence rested on the Industrial Policy Resolution of 1956 and the Industries (Development and Regulation) Act, 1951. The state reserved key industries for the public sector, and a private firm needed a licence to set up a factory, expand it, change its product or move it. The Monopolies and Restrictive Trade Practices Act, 1969 subjected large business houses to further approval for expansion. Many products were reserved for small-scale units, and foreign investment was held, under the Foreign Exchange Regulation Act, 1973, mostly to a minority share.

The aims were self-reliance, balanced regional growth and preventing concentration of economic power. The results were mixed. India built a wide industrial base, but the licence system bred delay and rent-seeking, firms stayed small to avoid controls, and products were often costly and of low quality. By the balance of payments crisis of 1991, with foreign exchange reserves enough for only a few weeks of imports, the case for change had become hard to resist.

What the 1991 policy removed

The Statement on Industrial Policy of July 1991 did four things. It abolished industrial licensing except for a short list of industries, now limited to a few such as defence equipment, hazardous chemicals, and tobacco products. It cut the list of industries reserved for the public sector from seventeen to eight, and over time to two: atomic energy and railway operations. Even atomic energy is now being opened: the SHANTI Bill of December 2025 provides for limited private participation in nuclear power under regulation, while reprocessing of spent fuel, high-level waste and heavy water stay with the government. It removed the requirement for large firms to seek approval for expansion under the monopolies law, which was later replaced altogether by the Competition Act, 2002, enforced by the Competition Commission of India. And it opened the door to foreign direct investment, allowing automatic approval of up to fifty-one per cent in priority industries.

Foreign investment rules have since been widened step by step. Most sectors now allow one hundred per cent foreign ownership under the automatic route, with government approval needed in a few, and caps in others such as defence, insurance and media. One significant tightening came in April 2020, when Press Note 3 required government approval for any investment from a country sharing a land border with India, a rule aimed mainly at China. In March 2026 the Cabinet eased it in part: investors from such countries holding a non-controlling beneficial stake of up to 10 per cent may now use the automatic route, and proposals in some manufacturing sectors such as electronic components are to be decided within 60 days.

The problem that remained: manufacturing

Liberalisation raised growth, but most of the gain came from services. Manufacturing's share of GDP stayed at roughly fifteen to seventeen per cent for three decades, well below that of East Asian economies at a similar stage, and it did not absorb the workers leaving agriculture. Economists point to several reasons: rigid labour laws that discouraged firms from growing, costly land and power, poor logistics, and an inverted duty structure in which inputs were taxed more heavily than finished goods.

Policy therefore shifted from removing controls to actively promoting industry. Make in India, launched in September 2014, aimed to raise manufacturing's share of GDP to twenty-five per cent and to improve the ease of doing business. National Investment and Manufacturing Zones and industrial corridors along the dedicated freight routes were planned. The phrase 'Atmanirbhar Bharat', used from 2020, added a stress on reducing dependence on imports in strategic goods.

Production-linked incentives and labour codes

The main new tool is the production-linked incentive. Announced in 2020 and extended to fourteen sectors with a total approved outlay of about 1.91 lakh crore rupees (as of Nov 2026), it pays firms a percentage of their additional sales over a base year for a fixed period, if they meet investment and output thresholds. Sectors include mobile phones and electronic components, pharmaceuticals, automobiles and components, textiles, food processing, solar modules, specialty steel and advanced chemistry battery cells. Mobile phone manufacturing is the clearest success: India moved from importing most phones to being a major exporter. By 30 June 2026, the government reported actual investment of about 2.58 lakh crore rupees under the schemes, incentives paid of 36,754 crore rupees, and mobile imports down by nearly 77 per cent. Critics note that some schemes have seen slow uptake, that much of the value in electronics is still imported, and that subsidies per job can be high. A separate scheme supports semiconductor fabrication and assembly.

On labour, Parliament consolidated twenty-nine central laws into four codes, on wages (2019), industrial relations, social security, and occupational safety, health and working conditions (2020). The government brought all four into force from 21 November 2025. Among other changes, the industrial relations code raises the threshold for needing government permission for lay-offs and closure from one hundred to three hundred workers.

Small firms

Micro, small and medium enterprises employ far more people than large industry. The Micro, Small and Medium Enterprises Development Act, 2006 defines them. In 2020 the definition was changed to use both investment in plant and machinery and turnover, and to treat manufacturing and services alike; the limits were raised again from April 2025, to investment of up to 2.5 crore rupees and turnover of up to 10 crore for micro firms, 25 and 100 crore for small, and 125 and 500 crore for medium. Registration is through the Udyam portal. The main problems are access to credit, delayed payments by large buyers, for which buyers must now pay within forty-five days to claim a tax deduction, and the 'missing middle', as few small firms grow into medium ones.

Three tools address credit and payment. The Credit Guarantee Fund Trust for Micro and Small Enterprises guarantees bank loans given without collateral, so that a small firm without property can still borrow. The Trade Receivables Discounting System, an online exchange regulated by the Reserve Bank, lets a small supplier sell its unpaid bills from large buyers to financiers and get cash at once. And public sector buyers must procure a share of their purchases, set at twenty-five per cent, from micro and small enterprises, through platforms such as the Government e-Marketplace.

Key facts

  • 1991: licensing abolished for all but a few industries; public sector reservation cut from 17 to 8, now 2 (atomic energy, railway operations).
  • MRTP Act, 1969 replaced by the Competition Act, 2002.
  • Press Note 3 (April 2020): government approval for FDI from land-border countries; eased in March 2026 for non-controlling stakes up to 10 per cent.
  • Make in India (2014): target of 25 per cent manufacturing share in GDP.
  • PLI: 14 sectors, approved outlay about 1.91 lakh crore rupees (as of Nov 2026); pays a share of incremental sales.
  • Four labour codes in force from 21 November 2025; lay-off permission threshold 300 workers.
  • MSME limits from April 2025: micro 2.5/10 crore, small 25/100, medium 125/500 (investment/turnover).
  • Payments to micro and small suppliers within 45 days to claim the tax deduction.

How the exam uses it

Prelims asks which industries still need a licence or are reserved for the public sector, the current MSME limits, and which sectors PLI covers. Mains asks why manufacturing has lagged and whether PLI is the right answer; weigh the evidence from electronics against the cost per job and the reliance on imported parts, and bring in labour, logistics and land. Past paper: Mains 2025 GS Paper III Q12 asked for the rationale, achievements and improvements of the PLI scheme. The usual mistake is to describe PLI as an upfront subsidy; it is paid only on extra sales after output is achieved. Another is quoting the old MSME limits, which Prelims 2023 Q71 tested.

Test yourself (no peeking)

Try to answer each one from memory, out loud or on paper. The effort of pulling it out is what makes it stay.

  1. Name four controls that existed before 1991.
  2. Which two industries remain reserved for the public sector?
  3. Why did policy shift from deregulation to promotion of manufacturing?
  4. How does a production-linked incentive work?
  5. What is the 'missing middle' among Indian firms?
Today 40 days 3 days10 daysa month With Aspiran Read once
How memory usually fades, and what bringing it back at the right time does. The app keeps that timetable for you.

Sources: PIB Backgrounder, The Manufacturing Transformation Powered by PLI, 13 November 2026, https://pib.gov.in/PressReleasePage.aspx?PRID=2335931, opened 2026-11-20; PIB, Cabinet approves PLI Scheme to 10 key sectors, 11 November 2020, https://pib.gov.in/PressReleasePage.aspx?PRID=1671912, opened 2026-11-20; PIB, Government amends FDI policy (Press Note 3 of 2020), 18 April 2020, https://pib.gov.in/PressReleasePage.aspx?PRID=1615711, opened 2026-11-21; PM India (Cabinet decision), changes in guidelines on investments from countries sharing land border, 10 March 2026, https://www.pmindia.gov.in/en/news_updates/cabinet-approves-changes-in-guidelines-on-investments-from-countries-sharing-land-border-with-india/, opened 2026-11-21; PIB explainer on the SHANTI Bill, 2025, 19 December 2025, https://static.pib.gov.in/WriteReadData/specificdocs/documents/2025/dec/doc20251219739001.pdf, opened 2026-11-21; PIB, Four Labour Codes made effective from 21 November 2025, https://pib.gov.in/PressReleasePage.aspx?PRID=2192463, opened 2026-11-20; PIB backgrounder, Industrial Relations Code, 2020, 23 November 2025, https://static.pib.gov.in/WriteReadData/specificdocs/documents/2025/nov/doc20251123703701.pdf, opened 2026-11-21; PIB, Year End Review 2025: Ministry of MSME, https://pib.gov.in/PressReleasePage.aspx?PRID=2209712, opened 2026-11-20; UPSC question paper csm-2025-gs3, https://www.upsc.gov.in/sites/default/files/GENERAL-STUDIES-PAPER-III-QP-CSM-25-010925.pdf, opened 2026-10-24; UPSC question paper csp-2023-gs1 with official answer key https://www.upsc.gov.in/sites/default/files/AnsKey-CSP-2023-Paper-I-090524.pdf, https://www.upsc.gov.in/sites/default/files/QP_CS_Pre_Exam_2023_280523.pdf, opened 2026-11-03

Syllabus topic: Industry, liberalisation and infrastructure (with the PYQs on it)

More notes

All notes →